CRL Satin Anodized Right Hand Sidelite Transom Patch with Support Fin Bracket and 1NT300 Insert - PH41RA

Finish: SATIN ANODIZED
$143.33
Quantity

The CRL Left Hand Sidelite Mounted Transom Patch with Support Fin Bracket is used to support a transom from a sidelite glass panel. It comes with a INT300 Insert for mounting a door with a CRL PH20A or PH21A Top Door Patch Fitting. For single doors, the insert can be removed on the non-hinged side allowing for a double swinging door. A INT306 Transom Patch Door Stop Insert can be used to create a one way door. Also, a INT305 Transom Patch Keeper Insert can be installed for use with an AMR205 Lock when used for a top of the door installation. The support fin glass should be sized in accordance with approved design criteria (refer to GANA or Manufacturers Manual) and secured to the ceiling with a PH92 Ceiling Mounted Support Fin Bracket.
Works with Both 2-3/4" (70 mm) and 2-9/16" (65 mm) Pivot Setback Door Patch Fittings
For 3/8" or 1/2" (10 or 12 mm) Glass
Left and Right Handed
Catalog Number: PH41RA
Also Available in These Catalogs:
AH18 Architectural Hardware Catalog 2018, PAGE 213Z
CRL63A Architectural Hardware Master, PAGE 375H
CRL93A Architectural Hardware, PAGE CH125
Color: Satin Anodized
Ship Via: Can Ship UPS
Shipping Weight: 2 lb (907g)
Minimum Order: 1 Each
CATALOG NUMBER DESCRIPTION COLOR
PH41RA CRL Satin Anodized Right Hand Sidelite Transom Patch with Support Fin Bracket and 1NT300 Insert
PH41RBR CRL Polished Brass Right Hand Sidelite Transom Patch with Support Fin Bracket and 1NT300 Insert
PH41RBS CRL Brushed Stainless Right Hand Sidelite Transom Patch with Support Fin Bracket and 1NT300 Insert
PH41RDU CRL Dark Bronze Right Hand Sidelite Transom Patch with Support Fin Bracket and 1NT300 Insert
PH41RPS CRL Polished Stainless Right Hand Sidelite Transom Patch With Support Fin Bracket and 1NT300 Insert
PH41RSB CRL Satin Brass Right Hand Sidelite Transom Patch with Support Fin Bracket and 1NT300 Insert
If the weight of the transom exceeds 100 lbs. (45.4 kg) the transom must be supported from the ceiling. This is to prevent the Patches from slipping from too much weight. Use either Cat. No. B5BC Smoke Baffle Channel or PH94 Patch Fittings. Please contact our Technical Sales Department for assistance.
GLASS FABRICATION REQUIRED:
Five 3/4" (19 mm) Diameter
Holes and Two Corner Notches
COMES WITH:
Template and Instructions
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting Glass Experts customer service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

Specific References