CRL Brushed Nickel Elite 074 Series Wall Mount Hinge - ELT074BN

Finish: BRUSHED NICKEL
$170.05
Quantity

The CRL Elite Series is a premium hinge for wider and heavier glass doors. Unlike most other hinges, the Elite can be side mounted on the top and bottom corners of the door, or anywhere in between. Containing a positive three-screw clamping system, the Elite Hinge incorporates a cut-out and through-stud that eliminates slippage. The Elite features the same 5 degree Reversible Pivot Pin used in our Geneva, Cathedral, Pinnacle, Roman, and Ultimate Series Hinges. It can also use the "GENP1N" Custom Pivot Pin for "off-angle" installations.
For Wider and Heavier Doors
Ability to be Side Mounted at Top and Bottom Corners
Available in Several Beautiful Finishes
3 Year Warranty
Wall Mount
Use Monolithic Tempered Glass
Catalog Number: ELT074BN
Also Available in These Catalogs:
SD16 Frameless Shower Door Hardware 2015, PAGE 119S
CRL23R Frameless Shower Door and Mirror Hardware, PAGE 167J
CRL93A Shower Door, PAGE SD033
Color: Brushed Nickel
Height: 3" (76 mm)
Length: 5" (127 mm)
Ship Via: Can Ship UPS
Shipping Weight: 2 lb (907g)
Minimum Order: 1 Each
CATALOG NUMBER DESCRIPTION COLOR
ELT074CH CRL Chrome Elite 074 Series Wall Mount Hinge
ELT0740RB CRL Oil Rubbed Bronze Elite 074 Series Wall Mount Hinge
ELT074BN CRL Brushed Nickel Elite 074 Series Wall Mount Hinge
ELT074PN CRL Polished Nickel Elite 074 Series Wall Mount Hinge
STANDARD REVERSIBLE PIVOT PIN: Each Roman Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90 degree. The opposite side of the Pin is marked 85 degree. Standard Roman Hinges come with the 90 degree side activated. Pre-Set Models come with the Pin pre-set for 85 degree (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.
CUSTOM PIVOT PIN: Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90 degree. If the standard 5 degree Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degree).
Using two hinges with 3/8" to 1/2" glass (10 to 12 mm) the hinge will hold up to 110 lbs. (50 kg) with a maximum door width of 34" (864 mm).
Using three hinges with 3/8" to 1/2" glass (10 to 12 mm) the hinge will hold up to 140 lbs. (64 kg) with a maximum door width of 38" (965 mm).
SPECIFICATIONS:
Glass Thickness: 3/8" (10 mm) to 1/2" (12 mm) Tempered Safety Glass
Special Feature: Has the ability to be side mounted at the top and bottom corners of the door, or anywhere in between. Corner mounting allows more glass exposure.
Construction: Solid Brass
Hinge Swings: 90 degree in and 90 degree Out
Closing Type: Self-Centering when within 15 degree of closed position.
Cut-Out and Hole Required
Includes: Gaskets, Screws, and Glass Fabrication Dimensions
Custom finishes are available on request. Contact the CRL Technical Sales Shower Door Department.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting Glass Experts customer service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

Specific References