CRL Black Powder Coated 1/2" Glass 4" Square Door Rail With Lock - 9-1/2" Patch - DR4SBL12PL

Finish: BLACK POWDER COATED
$351.62
Quantity

Our innovative glass entrance system, the CRL Wedge-Lock® Door Rail System features the exclusive CRL Wedge-Lock® Securing System (U.S. Patents 6,434,905 and 6,912,818 B2, Canadian Patent 2,419,706, and European Patent No. EP 1 404 939 B1). A totally new concept for securing the glass in the door rail. It works by applying pressure from the bottom of the door rail, using two glass retaining aluminum extrusions via a flat stainless steel bar. As this bar is pulled down with socket head cap bolts, pressure is applied to the glass retaining aluminum extrusions. The bottom of the extrusions are at an angle and fit into an angled groove in the door rail. As the glass retaining extrusions are being pulled down, the angled wedge in the door rail also pulls the glass retaining extrusions together. This action, along with our specially designed door retaining gasket, creates a tremendous amount of force (more than 900 lbs.) in our 9" (228.6 mm) Corner Rail. That's 100 lbs. per inch. Imagine how much force is created in our full length 35-3/4" (908 mm) Door Rails!
9-1/2" (203 mm) Length for 1/2" (12 mm) Glass
Use Monolithic Tempered Glass
Patented Wedge-Lock® Glass Securing System
Models to Fit from 3/8" to 3/4" (10 to 19 mm) Glass
Available in Several Stock Architectural Finishes - Custom Finishes Available
Available With and Without Locks
Matching Sidelite Rails Available
Catalog Number: DR4SBL12PL
Also Available in These Catalogs:
CRL63A Architectural Hardware Master, PAGE 125H
CRL14D Door and Entrance Catalog, PAGE 131D
AH18 Architectural Hardware Catalog 2018, PAGE 139Z
CRL93A Architectural Hardware, PAGE CH022
Length: 9-1/2" (241 mm)
Glass Thickness: 1/2" (12 mm)
Ship Via: Can Ship UPS
Shipping Weight: 5 lb (2.27kg)
Minimum Order: 1 Each
CATALOG NUMBER DESCRIPTION COLOR
DR4SBL12PL CRL Black Powder Coated 1/2" Glass 4" Square Door Rail With Lock - 9-1/2" Patch
DR4SBS12PL CRL Brushed Stainless 1/2" Glass 4" Square Door Rail With Lock - 9-1/2" Patch
DR4SDU12PL CRL Black Bronze 1/2" Glass 4" Square Door Rail With Lock - 9-1/2" Patch
DR4SPB12PL CRL Polished Brass 1/2" Glass 4" Square Door Rail With Lock - 9-1/2" Patch
DR4SPS12PL CRL Polished Stainless 1/2" Glass 4" Square Door Rail With Lock - 9-1/2" Patch
DR4SSA12PL CRL Satin Anodized 1/2" Glass 4" Square Door Rail With Lock - 9-1/2" Patch
The Wedge-Lock Glass Securing System gives you more than a secure attachment to the glass. It provides the fastest installation time of any door rail system offered to the industry. Experienced installers can have a door prepared for installation in less than ten minutes.
CRL Wedge-Lock Door Rails come completely fabricated and ready-to-install right out of the carton with the End Caps installed. After the rail is installed, the only thing required before hanging the door is to attach the door arm or pivot (not included) to the adjustable door alignment slide already assembled in the Door Rail. The Adjustable Door Alignment System feature allows you to adjust the door 1/8" (3 mm) toward or away from the jamb without removing the door. This is standard on both top and bottom rails.
After the door is installed all you need do to adjust the door is to remove the End Cap. This will reveal three socket head cap bolts. The center bolt is the securing bolt used to lock the adjustable slide in position. The two outer bolts are used to adjust the slide 1/8" (3.2 mm) in or out. The low profile of the adjustable slide allows the pivots with slotted grooves to be moved to a position other than the American Standard Setback of 2-3/4" (69.8 mm). This means we can fabricate them for vertically out-of-square openings.
Other reasons to choose Wedge-Lock Door Rails: Models are available to accept 3/8" to 3/4" (10 or 19 mm) glass; a rigid single component housing that will not shift and fall out of adjustment over time because it is not made up of two halves; the internal components do not require removal before installation; the glass securing pads are designed for longevity in extreme environments.
NOTE: All Wedge-Lock Door Rails feature the built-in Jamb Alignment Block, but arms and pivots must be ordered separately to meet job requirements.
CRL Wedge-Lock Door Rails come in several standard finishes, and can be quoted in custom finishes and widths upon request. Rail Specifications, Templates and Hardware Packages are available from CRL Technical Sales e-mail.
ORDERING INFORMATION:
All Door Rails are supplied with standard Kwik-Adjust Pivot Alignment System. Closer Arms and Floor or Overhead Pivots must be ordered separately.
Models with Locks are supplied with the Lock Mechanism installed. Matching finish Keyed Cylinders or Thumbturns must be ordered separately.
End Caps are included in the stock Door Rail lengths below. Door Rail length (including End Caps) must be specified when ordering Custom Length Rails.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting Glass Experts customer service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

Specific References