CRL Brushed Nickel Geneva 245 Series 135 Degree Pony Wall Mount Hinge - GEN245BN
These CRL Geneva Pony Wall Mount Series hinges can be used in place of the standard wall-to-glass hinges normally utilized when using wall mount hinges on a pony wall, and glass-to-glass hinges above them. The GEN280 model is for use with 180 degree applications, while the GEN245 is for use with 135 degree applications. Previously in this application the tile or marble had to be cut to allow the wall mount hinge to be recessed. That adjustment aligned the pivot points between both hinges to allow proper installation. Geneva Pony Wall Mount Hinges are modified with a shortened center block (containing only one centering spring) and a small back plate (with only two mounting holes). Each hinge has the same Reversible 5 degree Pivot Pin as our standard Geneva Hinge.
Self-Centering with Reversible 5 Degree Pivot Pin Custom Pivot Pin Available
Many Standard Finishes
3 Year Warranty
Pony Wall Mount for 135 Degree Application
Use Monolithic Tempered Glass
Self-Centering with Reversible 5 Degree Pivot Pin Custom Pivot Pin Available
Many Standard Finishes
3 Year Warranty
Pony Wall Mount for 135 Degree Application
Use Monolithic Tempered Glass
Catalog Number: GEN245BN
Also Available in These Catalogs:
SD16 Frameless Shower Door Hardware 2015, PAGE 115S
CRL23R Frameless Shower Door and Mirror Hardware, PAGE 141J
CRL93A Shower Door, PAGE SD011
Color: Brushed Nickel
Height: 3-1/2" (89 mm)
Width: 2-3/16" (56 mm)
Ship Via: Can Ship UPS
Shipping Weight: 2 lb (907g)
Minimum Order: 1 Each
Also Available in These Catalogs:
SD16 Frameless Shower Door Hardware 2015, PAGE 115S
CRL23R Frameless Shower Door and Mirror Hardware, PAGE 141J
CRL93A Shower Door, PAGE SD011
Color: Brushed Nickel
Height: 3-1/2" (89 mm)
Width: 2-3/16" (56 mm)
Ship Via: Can Ship UPS
Shipping Weight: 2 lb (907g)
Minimum Order: 1 Each
CATALOG NUMBER DESCRIPTION COLOR
GEN245CH CRL Polished Chrome Geneva 245 Series 135 Degree Pony Wall Mount Hinge
GEN2450RB CRL Oil Rubbed Bronze Geneva 245 Series 135 Degree Pony Wall Mount Hinge
GEN245BN CRL Brushed Nickel Geneva 245 Series 135 Degree Pony Wall Mount Hinge
GEN245CH CRL Polished Chrome Geneva 245 Series 135 Degree Pony Wall Mount Hinge
GEN2450RB CRL Oil Rubbed Bronze Geneva 245 Series 135 Degree Pony Wall Mount Hinge
GEN245BN CRL Brushed Nickel Geneva 245 Series 135 Degree Pony Wall Mount Hinge
NOTE: For 135 degree installations it is required that the face of the pony wall be at a 45 degree angle to the wall, and a 90 degree angle to the door plane.
Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28" (711 mm).
Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32" (813 mm).
SPECIFICATIONS:
Glass Thickness: 5/16" (8 mm) to 1/2" (12 mm) Tempered Safety Glass
Special Features: Mounted to surface of tile or marble, as opposed to having to cut into wall to recess the back plate to vertically align pivot points.
Construction: Solid Brass
Hinge Swings: Approximately 90 degree in and 90 degree Out
Closing Type: Self-Centering when within 15 degree of closed position.
Cut-Out Required Includes: Gaskets, Screws, and Glass Fabrication Dimensions. Cat. No. GEN13 Gasket Pack must be purchased separately for use with 5/16" (8 mm) thick tempered glass.
Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28" (711 mm).
Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32" (813 mm).
SPECIFICATIONS:
Glass Thickness: 5/16" (8 mm) to 1/2" (12 mm) Tempered Safety Glass
Special Features: Mounted to surface of tile or marble, as opposed to having to cut into wall to recess the back plate to vertically align pivot points.
Construction: Solid Brass
Hinge Swings: Approximately 90 degree in and 90 degree Out
Closing Type: Self-Centering when within 15 degree of closed position.
Cut-Out Required Includes: Gaskets, Screws, and Glass Fabrication Dimensions. Cat. No. GEN13 Gasket Pack must be purchased separately for use with 5/16" (8 mm) thick tempered glass.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting Glass Experts customer service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Specific References